5 DIY Quick Fixes for Leaking Pipes

It is so ironic to just look at how your pipe leaks while in the first place you can do something to fix it. Still, the main thing is not to panic so you can have in mind the quick fixes to do. Leaking pipes are primarily the leading plumbing issue to every household. Well, it cannot be avoided especially if you do not maintain it at all. It is quite impossible if no one knows how to fix it by following the tips below. It’s easy and you don’t need to complicate yourself.

 

What can you do now? There are lots of ways to deal with it. Have in mind the following quick fixes to solve your leaking pipe issue at home. Remember, if you have not performed the steps effectively, you better call a plumber. Trust yourself and these will guide you.

 

  1. Turn off the main water valve

This must be your first step. You need to locate the leak and then turn off the main water valve immediately. This will stop the water flow from running thoroughly. Shutting off the water will give you time to prepare the materials and do the later steps. Also, you might get panicked once you recognize it so when you stop it right away, it helps you to stay calm.

 

  1. Dry the area

You need to dry the area so it will be easy for you to apply quick wrapping around the pipes to stop it from leaking. Take a piece of cloth or towel to dry the area where the leak comes from. You need to ensure that it is away from dirt and dampness so the epoxy putty will stick and hold around the pipe.

 

  1. Prepare the plumber’s epoxy putty

Epoxy putty is best used in leaking pipes or any leak in your plumbing lines. This is easy to use and you need not to worry of the cost because it is at a reasonably low cost. You can apply it quickly for fixes to any leak and is truly effective. This comes in small tubes and you need to cut it first and rub it with the tips of your fingers. Wait until the colour surface changes and it is ready to use.

 

 

  1. Apply the epoxy putty

This time, apply the epoxy putty. Spread it around the leaking pipe and make sure that it fits. Stretching it too much will make it thin and ineffective. Make sure to leave an excess along the pipe so it will completely hold and stick into the leaking region.

 

  1. Finish then turn the water back on

You can now turn on the main water valve and have the water back from your faucet. Wait for a couple of hours and observe. Go back and inspect the leaking pipe to make sure there are no damp patches. To check it, you can place pieces of paper towel or tissue around the pipe. If you noticed none, your quick fix is a job well done.

 

Applause! Instead of doing nothing, you can already fix your leaking pipe in a quick way. This is to make sure that you stop it right away before it gets worse. It is always a good idea to prepare yourself whatever happens to your plumbing line.